Electric Vehicle Charging · Load hub
Which Power Stations Can Run a Tesla Cybertruck (Mobile Connector 32A)?
All 30 portable power stations, home batteries and hybrid inverters in the GridSpec database, ranked by compatibility and runtime for the Tesla Cybertruck (Mobile Connector 32A).
Electrical profile
- Running power
- 7,680 W
- Starting surge
- 7,680 W (1.0×)
- US/NA voltage
- 240 V
- UK/EU/AU voltage
- 230 V
- US connection
- NEMA 14-50P
- UK/EU/AU connection
- Type 2 EVSE · IEC 60309 32A Commando
- NEC breaker
- 40 A
- IEC MCB
- 32 A
Sizing summary
The Tesla Cybertruck (Mobile Connector 32A) draws 7,680 W while running and 7,680 W at start-up — a surge ratio of 1.0×, meaning it behaves as a steady resistive or electronic load. In North America it is a 240 V load, so only split-phase-capable units qualify: 18 otherwise-capable 120 V units are excluded on voltage alone.
3 of 30 sources pass every check in North America and 7 of 35 pass in 230 V markets. The leanest fully compatible choice is the Tesla Powerwall 3 , while the EG4 18kPV Hybrid Inverter + PowerPro 14.3kWh WallMount delivers the longest runtime (1.6 hrs at 100% duty) .
EV charging is a continuous load by definition, so the NEC 125% rule always applies: this 7,680 W profile needs a 40 A circuit in North America. In 230 V markets it draws 32.0 A (7,360 W).
Every power source ranked for the Tesla Cybertruck (Mobile Connector 32A)
| Power source | Capacity / output | US/NA verdict | UK/EU/AU verdict | Load | Runtime @ 100% | |
|---|---|---|---|---|---|---|
| EG4 18kPV Hybrid Inverter + PowerPro 14.3kWh WallMount | 14,336 Wh / 12,000 W | Verified Compatible | Verified Compatible | 64% | 1.6 hrs | Full report → |
| Tesla Powerwall 3 | 13,500 Wh / 11,500 W | Verified Compatible | Verified Compatible | 67% | 1.5 hrs | Full report → |
| Sungrow SH10RS Hybrid Inverter + Battery UK / EU / AU only | 9,600 Wh / 10,000 W | Not sold | Verified Compatible | 74% | 1.1 hrs | Full report → |
| Selectronic SP Pro AU Off-Grid Inverter UK / EU / AU only | 10,240 Wh / 7,500 W | Not sold | Compatible · High Load | 98% | 1.2 hrs | Full report → |
| Enphase IQ Battery 5P (Dual 10kWh Bank) | 10,000 Wh / 7,680 W | Compatible · High Load | Compatible · High Load | 100% | 1.1 hrs | Full report → |
| Sigenergy SigenStor 5-in-1 System UK / EU / AU only | 8,000 Wh / 8,000 W | Not sold | Compatible · High Load | 92% | 55 min | Full report → |
| Victron MultiPlus-II 48/5000 + 10kWh LiFePO4 Bank | 10,240 Wh / 4,000 W | 240V Split-Phase Required | Continuous Overload | 192% | — | Full report → |
| Goal Zero Yeti PRO 4000 | 3,993 Wh / 3,600 W | 240V Split-Phase Required | Continuous Overload | 213% | — | Full report → |
| Fossibot F3600 Pro | 3,840 Wh / 3,600 W | 240V Split-Phase Required | Continuous Overload | 213% | — | Full report → |
| EcoFlow Delta Pro (Gen 1) | 3,600 Wh / 3,600 W | 240V Split-Phase Required | Continuous Overload | 213% | — | Full report → |
| Mango Power E (3.5kWh LFP) | 3,530 Wh / 3,000 W | 240V Split-Phase Required | Continuous Overload | 256% | — | Full report → |
| Bluetti AC500 + B300S | 3,072 Wh / 5,000 W | 240V Split-Phase Required | Continuous Overload | 154% | — | Full report → |
| Pecron E3600LFP | 3,072 Wh / 3,600 W | 240V Split-Phase Required | Continuous Overload | 213% | — | Full report → |
| Jackery Explorer 3000 Pro | 3,024 Wh / 3,000 W | 240V Split-Phase Required | Continuous Overload | 256% | — | Full report → |
| Bluetti AC300 + B300K | 2,764 Wh / 3,000 W | 240V Split-Phase Required | Continuous Overload | 256% | — | Full report → |
| Anker SOLIX F2600 | 2,560 Wh / 2,400 W | 240V Split-Phase Required | Continuous Overload | 320% | — | Full report → |
| EcoFlow Delta 2 Max | 2,048 Wh / 2,400 W | 240V Split-Phase Required | Continuous Overload | 320% | — | Full report → |
| Anker SOLIX F2000 (PowerHouse 767) | 2,048 Wh / 2,400 W | 240V Split-Phase Required | Continuous Overload | 320% | — | Full report → |
| Bluetti AC200L | 2,048 Wh / 2,400 W | 240V Split-Phase Required | Continuous Overload | 320% | — | Full report → |
| Jackery Explorer 2000 Plus | 2,042 Wh / 3,000 W | 240V Split-Phase Required | Continuous Overload | 256% | — | Full report → |
| Bluetti AC240 (IP65 Weatherproof) | 1,536 Wh / 2,400 W | 240V Split-Phase Required | Continuous Overload | 320% | — | Full report → |
| Jackery Explorer 1000 v2 | 1,070 Wh / 1,500 W | 240V Split-Phase Required | Continuous Overload | 512% | — | Full report → |
| Anker SOLIX C1000 | 1,056 Wh / 1,800 W | 240V Split-Phase Required | Continuous Overload | 427% | — | Full report → |
| EcoFlow Delta 3 Plus | 1,024 Wh / 1,800 W | 240V Split-Phase Required | Continuous Overload | 427% | — | Full report → |
| EG4 6000XP Off-Grid Inverter + 10.2kWh Server Rack | 10,240 Wh / 6,000 W | Continuous Overload | Continuous Overload | 128% | — | Full report → |
| Bluetti EP800 + 2x B500 Home System | 9,920 Wh / 7,600 W | Continuous Overload | Compatible · High Load | 101% | — | Full report → |
| Zendure SuperBase V6400 | 6,438 Wh / 3,800 W | Continuous Overload | Continuous Overload | 202% | — | Full report → |
| EcoFlow Delta Pro Ultra (1 Inverter + 1 Battery) | 6,144 Wh / 7,200 W | Continuous Overload | Continuous Overload | 107% | — | Full report → |
| Fox ESS EP5 Modular Hybrid UK / EU / AU only | 5,180 Wh / 5,000 W | Not sold | Continuous Overload | 147% | — | Full report → |
| myenergi Libbi (5kW Inverter + 5kWh Battery) UK / EU / AU only | 5,120 Wh / 5,000 W | Not sold | Continuous Overload | 147% | — | Full report → |
| Oukitel BP5000 Pro Max | 5,120 Wh / 5,000 W | Continuous Overload | Continuous Overload | 154% | — | Full report → |
| Jackery Explorer 5000 Plus | 5,040 Wh / 7,200 W | Continuous Overload | Continuous Overload | 107% | — | Full report → |
| EcoFlow Delta Pro 3 | 4,096 Wh / 4,000 W | Continuous Overload | Continuous Overload | 192% | — | Full report → |
| Anker SOLIX F3800 | 3,840 Wh / 6,000 W | Continuous Overload | Continuous Overload | 128% | — | Full report → |
| Anker SOLIX F3800 Plus | 3,840 Wh / 6,000 W | Continuous Overload | Continuous Overload | 128% | — | Full report → |
Frequently asked questions
What size power station do I need for a Tesla Cybertruck (Mobile Connector 32A)?
You need at least 7,680 W of continuous inverter output, 7,680 W of surge capacity and 120/240 V split-phase output in North America. 3 of the 30 power sources we track meet all three requirements; the leanest is the Tesla Powerwall 3.
Which power station runs a Tesla Cybertruck (Mobile Connector 32A) the longest?
The EG4 18kPV Hybrid Inverter + PowerPro 14.3kWh WallMount offers the longest runtime among compatible units: about 1.6 hrs at a 100% duty cycle thanks to its 14,336 Wh battery.
What breaker does a Tesla Cybertruck (Mobile Connector 32A) need?
In North America: 32.0 A at 240 V × 1.25 = 40.0 A, so a 40 A breaker. In the UK, EU and Australia: 32.0 A at 230 V on a 32 A MCB with RCD protection.
More Electric Vehicle Charging
- Tesla Model Y (Mobile Connector 32A) 7,680 W
- Tesla Model 3 (Portable 16A Level 2 Mode) 3,840 W
- Ford F-150 Lightning (Mobile Power Cord 30A) 7,200 W
- Rivian R1T / R1S (24A Portable Charger) 5,760 W
- Hyundai Ioniq 5 (24A Level 2 Portable EVSE) 5,760 W
- Kia EV9 (32A Level 2 EV Charger) 7,680 W
- Chevy Equinox EV (Level 1 120V / 12A Cord) 1,440 W
- BMW i4 / iX (Flexible Fast Charger 24A) 5,760 W
- Volvo EX30 / EX90 (16A Portable EV Charger) 3,840 W